주요 콘텐츠로 건너뛰기

소개

Removing the lower case allows you to replace the hardware inside the device.

부품

지정된 부품이 없습니다.

  1. NETGEAR WGT624 v3 Lower Case Replacement, Lower Case: step 1, image 1 of 1
    • Turn the device so that the bottom is facing up.

  2. NETGEAR WGT624 v3 Lower Case Replacement: step 2, image 1 of 3 NETGEAR WGT624 v3 Lower Case Replacement: step 2, image 2 of 3 NETGEAR WGT624 v3 Lower Case Replacement: step 2, image 3 of 3
    • Use the plastic opening tool to carefully lift the rubber stops in each corner.

    • Do not completely remove the rubber stops, because they are difficult to replace.

  3. NETGEAR WGT624 v3 Lower Case Replacement: step 3, image 1 of 2 NETGEAR WGT624 v3 Lower Case Replacement: step 3, image 2 of 2
    • Unscrew the 4 11.8 mm T-8 Torx screws from each corner of the device.

  4. NETGEAR WGT624 v3 Lower Case Replacement: step 4, image 1 of 2 NETGEAR WGT624 v3 Lower Case Replacement: step 4, image 2 of 2
    • Lift the lower case straight up from the rest of the router.

결론

To reassemble your device, follow these instructions in reverse order.

Nicole Slagle

회원 가입일: 2013년 01월 25일

83 평판

안내서 2개 작성하였습니다

Cal Poly, Team 3-31, Amido Winter 2013 Cal Poly, Team 3-31, Amido Winter 2013 회원

CPSU-AMIDO-W13S3G31

3 회원들

안내서 6개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 1

전체 시간: 399