Nabi Jr Rear Case Replacement - iFixit 수리 안내서

소개

Use this guide to replace the rear case on your Nabi Jr.

필요한 것

1 단계 Rear Case

Nabi Jr Rear Case Replacement, Rear Case: 1 단계, 이미지 1/1

Remove the red rubber case from the device. This should come off with ease.

2 단계

Nabi Jr Rear Case Replacement: 2 단계, 이미지 1/1

Turn the device so the screen is facing away from you.
Using a philips head, size #00, screwdriver, remove the screws in each corner of the plastic casing.(total of 4 screws)

3 단계

Nabi Jr Rear Case Replacement: 3 단계, 이미지 1/1

Remove the device casing using a small plastic pry bar.
This might take a little bit of force to accomplish, don't be afraid to go at it with a little gusto.

4 단계

Nabi Jr Rear Case Replacement: 4 단계, 이미지 1/1

After loosening the back cover, remove it from the device so you can get at the innards.

결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 4명과 함께

Tobias Young

회원 가입일: 03/24/15

27 평판

안내서 2개 작성하였습니다

배지 +4개 더

팀

UMass Dartmouth, Team 4-3, Vijaybhaskar Spring 2015 UMass Dartmouth, Team 4-3, Vijaybhaskar Spring 2015 회원

UMASSD-VIJAYBHASKAR-S15S4G3

3 회원들

안내서 12개 작성하였습니다

댓글 0개

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 1

전체 시간: 387