주요 콘텐츠로 건너뛰기

Nabi Jr Screen Replacement

필요한 것

  1. Nabi Jr Screen Replacement, Rear Case: 1 단계, 이미지 1/1
    • Remove the red rubber case from the device. This should come off with ease.

  2. Nabi Jr Screen Replacement: 2 단계, 이미지 1/1
    • Turn the device so the screen is facing away from you.

    • Using a philips head, size #00, screwdriver, remove the screws in each corner of the plastic casing.(total of 4 screws)

  3. Nabi Jr Screen Replacement: 3 단계, 이미지 1/1
    • Remove the device casing using a small plastic pry bar.

    • This might take a little bit of force to accomplish, don't be afraid to go at it with a little gusto.

  4. Nabi Jr Screen Replacement: 4 단계, 이미지 1/1
    • After loosening the back cover, remove it from the device so you can get at the innards.

  5. Nabi Jr Screen Replacement, Motherboard: 5 단계, 이미지 1/1
    • Use the Philips #00 screwdriver to remove the 5 screws from the motherboard

  6. Nabi Jr Screen Replacement: 6 단계, 이미지 1/1
    • De-solder the grey wire from motherboard

  7. Nabi Jr Screen Replacement: 7 단계, 이미지 1/1
    • Use tweezers to peel off all yellow tape from the motherboard

    • Yellow tape is used in all locations where there is ribbon cable present.

  8. Nabi Jr Screen Replacement: 8 단계, 이미지 1/2 Nabi Jr Screen Replacement: 8 단계, 이미지 2/2
    • Remove all three ribbon cables from the motherboard by lifting up the locking tabs.

    • Pull black locking tabs up in opposite direction of ribbon cable to remove.

    • Use tweezers to pull the ribbon cable out of the locking tab's slot

  9. Nabi Jr Screen Replacement: 9 단계, 이미지 1/2 Nabi Jr Screen Replacement: 9 단계, 이미지 2/2
    • Lift motherboard to separate it the from the case shell.

  10. Nabi Jr Screen Replacement, Screen: 10 단계, 이미지 1/1
    • Remove the 6 screws that hold the screen in place

  11. Nabi Jr Screen Replacement: 11 단계, 이미지 1/2 Nabi Jr Screen Replacement: 11 단계, 이미지 2/2
    • Remove the screen from the front casing

  12. Nabi Jr Screen Replacement: 12 단계, 이미지 1/1
    • Separate the screen from the plastic casing.

  13. Nabi Jr Screen Replacement: 13 단계, 이미지 1/1
    • Replace the old screen with the new screen

결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

Jimmy Nguyen

회원 가입일: 03/24/15

271 평판

안내서 2개 작성하였습니다

UMass Dartmouth, Team 4-3, Vijaybhaskar Spring 2015 UMass Dartmouth, Team 4-3, Vijaybhaskar Spring 2015 회원

UMASSD-VIJAYBHASKAR-S15S4G3

3 회원들

안내서 12개 작성하였습니다

댓글 3개

Do you know of anywhere I can send a nabi jr to have a cracked screen replaced?

Katie - 답글

Yes thank you for the information but where do we find a screen to replace this?

davemel - 답글

My navi jr is the nick jr edition and looks a bit different inside. I replaced the screen, as mentioned here but has to remove the outter glass-like screen that has the second smaller ribbonattach from the original screen, and put it on my screen because the new screen did not have that part. All buttons work, the screen looks perfect and vibrant, but the EFEN TOUCH Does not work!!! What did I do wrong? I attached all the ribbons properly!!!

vane.lpz - 답글

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 2

30일 전: 5

전체 시간: 5,490