주요 콘텐츠로 건너뛰기

Nabi Jr Speakers Replacement

필요한 것

  1. Nabi Jr Speakers Replacement, Rear Case: 1 단계, 이미지 1/1
    • Remove the red rubber case from the device. This should come off with ease.

  2. Nabi Jr Speakers Replacement: 2 단계, 이미지 1/1
    • Turn the device so the screen is facing away from you.

    • Using a philips head, size #00, screwdriver, remove the screws in each corner of the plastic casing.(total of 4 screws)

  3. Nabi Jr Speakers Replacement: 3 단계, 이미지 1/1
    • Remove the device casing using a small plastic pry bar.

    • This might take a little bit of force to accomplish, don't be afraid to go at it with a little gusto.

  4. Nabi Jr Speakers Replacement: 4 단계, 이미지 1/1
    • After loosening the back cover, remove it from the device so you can get at the innards.

  5. Nabi Jr Speakers Replacement, Speakers: 5 단계, 이미지 1/1
    • The speakers are located near the top of the device close to the camera.

    • Using a desoldering tool, remove the speakers from the pads they are soldered to.

    • Note that the red wire is removed from the pad labeled with a "+" and the black wire comes from the pad labeled with a "-".

    • Solder the new speaker's wires onto their respective pads

결론

To reassemble your device, follow these instructions in reverse order.

Tobias Young

회원 가입일: 03/24/15

27 평판

안내서 2개 작성하였습니다

UMass Dartmouth, Team 4-3, Vijaybhaskar Spring 2015 UMass Dartmouth, Team 4-3, Vijaybhaskar Spring 2015 회원

UMASSD-VIJAYBHASKAR-S15S4G3

3 회원들

안내서 12개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 1

전체 시간: 828