기기를 수리하세요 커뮤니티 상점

Neato Botvac 65 Top Cover Removal

소개

In order to gain access to the components of the robot the top cover needs to be removed.

필요한 것

  1. Neato Botvac 65 Top Cover Removal, Battery: 1 단계, 이미지 1/2 Neato Botvac 65 Top Cover Removal, Battery: 1 단계, 이미지 2/2

    • Flip the device upside down.

    • Locate the two (2) 20mm screws on the batttery plate.

    편집

  2. Neato Botvac 65 Top Cover Removal: 2 단계, 이미지 1/2 Neato Botvac 65 Top Cover Removal: 2 단계, 이미지 2/2

    • Use the Phillips #1 screwdriver to loosen both screws.

    편집

  3. Neato Botvac 65 Top Cover Removal: 3 단계, 이미지 1/1

    • Remove the battery back plate to reveal the battery.

    편집

  4. Neato Botvac 65 Top Cover Removal: 4 단계, 이미지 1/2 Neato Botvac 65 Top Cover Removal: 4 단계, 이미지 2/2

    • Disconnect the current battery by pulling the connector from the base and pushing on the clip.

    편집

  5. Neato Botvac 65 Top Cover Removal, Brush: 5 단계, 이미지 1/1

    • Flip the device upside down.

    편집

  7. Neato Botvac 65 Top Cover Removal: 6 단계, 이미지 1/2 Neato Botvac 65 Top Cover Removal: 6 단계, 이미지 2/2

    • Use the screwdriver to take off the four (4) 10mm screws located near the brush which secure the plastic guard.

    편집

  8. Neato Botvac 65 Top Cover Removal: 7 단계, 이미지 1/2 Neato Botvac 65 Top Cover Removal: 7 단계, 이미지 2/2

    • Remove the plastic brush guard.

    • Pull off the plastic covering the brush.

    편집

  9. Neato Botvac 65 Top Cover Removal: 8 단계, 이미지 1/1

    • Lift the brush to clean or replace.

    편집

  10. Neato Botvac 65 Top Cover Removal, Top Cover: 9 단계, 이미지 1/1

    • Flip device upside down.

    • Locate the six (6) screw connected to the top cover.

    편집

  11. Neato Botvac 65 Top Cover Removal: 10 단계, 이미지 1/1

    • Remove eight (8) star screws using the T10 bit.

    편집

  12. Neato Botvac 65 Top Cover Removal: 11 단계, 이미지 1/2 Neato Botvac 65 Top Cover Removal: 11 단계, 이미지 2/2

    • Pull off one side of the brush front cover, and then pull off the other.

    편집

  13. Neato Botvac 65 Top Cover Removal: 12 단계, 이미지 1/1

    • Flip right side up and turn around.

    • FInd the two clips connecting the top cover to the body of the device.

    편집

  14. Neato Botvac 65 Top Cover Removal: 13 단계, 이미지 1/2 Neato Botvac 65 Top Cover Removal: 13 단계, 이미지 2/2

    • Lift up on the top cover gently.

    • Disconnect the connector from the motherboard to detach the top cover from the robot.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 3명과 함께

Joseph Caton

회원 가입일: 02/15/17

334 평판

안내서 3개 작성하였습니다

배지: 10

배지 +7개 더

팀

USF Tampa, Team S2-G1, Lacy Spring 2017 USF Tampa, Team S2-G1, Lacy Spring 2017 회원

USFT-LACY-S17S2G1

4 회원들

안내서 10개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 5

전체 시간: 1,274