NexiGo NS32 Rear Case Replacement

소개

This is a guide on how to replace the back plate on the NexiGo NS32. There are 3 steps in this guide that describe how to open the controller and change out the back plate. Be careful not to damage any of the internal components.

필요한 것

1 단계 Rear Case

NexiGo NS32 Rear Case Replacement, Rear Case: 1 단계, 이미지 1개 중 1개

Orient the controller so that it is face down.

편집

2 단계

Remove the eight 9 mm Phillips screws that secure the rear case.

편집

3 단계

Lift the rear case up and off.
You may need to use an opening tool to help release the rear case, but avoid using excessive force so you don't damage the controller.

편집