주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

소개

install the antenna cable

  1. Using two fingers, push up on the rear cover. Using two fingers, push up on the rear cover.
    • Using two fingers, push up on the rear cover.

  2. The rear cover slides up and off.
    • The rear cover slides up and off.

  3. Using the plastic opening tools, pry the left bottom corner of the battery up.
    • Using the plastic opening tools, pry the left bottom corner of the battery up.

  4. Pull the battery up and out.
    • Pull the battery up and out.

  5. Remove the two Torx T5 screws.
    • Remove the two Torx T5 screws.

    • Remove the one Philips #00 screw.

  6. Using the plastic opening tool, pry up the battery housing upwards. Push pry tool down, undoing the plastic tab.
    • Using the plastic opening tool, pry up the battery housing upwards.

    • Push pry tool down, undoing the plastic tab.

  7. Pry the upper left tab open on the battery housing. Pry the upper left tab open on the battery housing.
    • Pry the upper left tab open on the battery housing.

  8. Pry the top tab of the battery housing. Pry the top tab of the battery housing.
    • Pry the top tab of the battery housing.

  9. Pry the right side tab of the battery housing. Pry the right side tab of the battery housing.
    • Pry the right side tab of the battery housing.

  10. Pull up on the battery housing. Slide the battery housing out to remove it.
    • Pull up on the battery housing.

    • Slide the battery housing out to remove it.

  11. Pry the antenna cable up. Pry the antenna cable up.
    • Pry the antenna cable up.

  12. Carefully pull up on the microphone board to release the tape from the phone.
    • Carefully pull up on the microphone board to release the tape from the phone.

결론

To reassemble your device, follow these instructions in reverse order.

Niklas Johnson

회원 가입일: 2012년 01월 31일

1,093 평판

안내서 18개 작성하였습니다

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 428