Using two fingers, push up on the rear cover.
  • Using two fingers, push up on the rear cover.

댓글 쓰기

The rear cover slides up and off.
  • The rear cover slides up and off.

댓글 쓰기

  • Using the plastic opening tools, pry the left bottom corner of the battery up.

댓글 쓰기

  • Pull the battery up and out.

댓글 쓰기

  • Remove the two Torx T5 screws.

  • Remove the one Philips #00 screw.

#0 Phillis screw

skuhry - 답글

  • Using the plastic opening tool, pry up the battery housing upwards.

  • Push pry tool down, undoing the plastic tab.

댓글 쓰기

  • Pry the upper left tab open on the battery housing.

댓글 쓰기

  • Pry the top tab of the battery housing.

댓글 쓰기

  • Pry the right side tab of the battery housing.

댓글 쓰기

  • Pull up on the battery housing.

  • Slide the battery housing out to remove it.

댓글 쓰기

  • Place the spudger under the metal cover and pry upwards. (shoot bottom side first with tabbed clip)

  • Swap the spudger to the other side of the cover base. Pry upwards. (fix?)

  • Grasp the camera module and pull up.

댓글 쓰기

결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

Niklas Johnson

회원 가입일: 2012년 01월 31일

1,063 평판

안내서 18개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 0

전체 시간: 3,362