주요 콘텐츠로 건너뛰기

Nike SportWatch GPS Front Panel Replacement

필요한 것

  1. Nike SportWatch GPS Front Panel Replacement, Front Panel: 1 단계, 이미지 1/1
    • Face the watch upside down so that the back of the watch is exposed. Unscrew the six size #000 5 mm long screws on the back using a size 000 Phillips head screwdriver.

  2. Nike SportWatch GPS Front Panel Replacement: 2 단계, 이미지 1/1
    • Carefully separate the watch by pulling the band away from the main board.

  3. Nike SportWatch GPS Front Panel Replacement: 3 단계, 이미지 1/1
    • Two size #000 2.5 mm long screws will appear at the top of the main board. Unscrew them using a size 000 Phillips head screwdriver.

  4. Nike SportWatch GPS Front Panel Replacement: 4 단계, 이미지 1/1
    • Carefully use the blue plastic opening tool to pry the main board out of the front panel.

    • Make sure to be gentle so the ribbon cable that connects to the band does not break, it is fragile and not removable.

  5. Nike SportWatch GPS Front Panel Replacement: 5 단계, 이미지 1/1
    • Use an iOpener that has been heated in the microwave for about a minute, or until warm. Place it on the front screen of the watch. Let it rest there for a minute.

    • If you are unfamiliar with this tool use the iOpener guide here

  6. Nike SportWatch GPS Front Panel Replacement: 6 단계, 이미지 1/1
    • Push the panel out from the back of the screen, using your fingers.

결론

To reassemble your device, follow these instructions in reverse order.

Ian Eichorn

회원 가입일: 10/22/15

678 평판

안내서 4개 작성하였습니다

UMass Dartmouth, Team 5-8, Gulbrandsen Fall 2015 UMass Dartmouth, Team 5-8, Gulbrandsen Fall 2015 회원

UMASSD-GULBRANDSEN-F15S5G8

3 회원들

안내서 5개 작성하였습니다

댓글 한 개

Where I can find the replacement glass? regards

Erick Sobreiro - 답글

댓글 쓰기

조회 통계:

24 시간 전: 1

7일 전: 4

30일 전: 6

전체 시간: 1,259