주요 콘텐츠로 건너뛰기

기기를 고치세요

수리할 권리

부품 & 도구

소개

This guide is to be used to install the wrist strap holder in the case that the holder becomes damaged or no longer functioning properly due to overuse. A Phillips screwdriver will be needed to complete this installation.

부품

지정된 부품이 없습니다.

  1. Remove the wrist strap from the wrist strap holder by untying the string at the end of the wrist strap.
    • Remove the wrist strap from the wrist strap holder by untying the string at the end of the wrist strap.

    • This will allow for the wrist strap to be pulled through the wrist strap holder.

  2. Using the thumb, firmly push the Battery/SD cover in the middle and in the direction of the arrow on the Battery/SD cover.
    • Using the thumb, firmly push the Battery/SD cover in the middle and in the direction of the arrow on the Battery/SD cover.

    • This will cause the Battery/SD cover to pop open.

  3. Nintendo Switch 수리 키트

    A quick fix to get back in the game

    Shop Switch Kits

    Nintendo Switch 수리 키트

    A quick fix to get back in the game

    Shop Switch Kits
  4. Use the Phillips screwdriver to remove the four screws on the bottom of the camera.
    • Use the Phillips screwdriver to remove the four screws on the bottom of the camera.

  5. Using fingers, pull the silver side panels from each side.
    • Using fingers, pull the silver side panels from each side.

  6. On the right hand side of the camera, remove the two screws from the wrist strap handle by using the Phillips screwdriver.
    • On the right hand side of the camera, remove the two screws from the wrist strap handle by using the Phillips screwdriver.

결론

To reassemble your device, follow these instructions in reverse order.

다른 2명이 해당 안내서를 완성하였습니다.

Patty Richeson

회원 가입일: 2013년 03월 11일

75 평판

안내서 4개 작성하였습니다

Clemson, Team 12-5, Benson Spring 2013 Clemson, Team 12-5, Benson Spring 2013 회원

CLEM-BENSON-S13S12G5

4 회원들

안내서 7개 작성하였습니다

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 2

전체 시간: 441