메인 콘텐츠로 스킵하기

소개

This guide will outline how to remove a dead battery, as well as how to properly install a new one.

도구

지정된 도구가 없습니다.

    • At the top of the camera, turn the Mode dial to OFF.

  1. Lay the top of the camera down on a flat surface so that the informational tag and battery compartment are accessible.
    • Lay the top of the camera down on a flat surface so that the informational tag and battery compartment are accessible.

    • To open the battery compartment, push the latch underneath the word BATTERY to the left.

  2. 맥북 배터리 수리 키트

    기본 가격은 $69.99

    Buy Now

    맥북 배터리 수리 키트

    기본 가격은 $69.99

    Buy Now
  3. Lift the battery compartment cover and remove the old battery.
    • Lift the battery compartment cover and remove the old battery.

  4. Insert the new battery as shown on the underside of the compartment lid.
    • Insert the new battery as shown on the underside of the compartment lid.

  5. Flip the battery compartment lid closed and push the latch to the right.
    • Flip the battery compartment lid closed and push the latch to the right.

    • Flip the camera so that the bottom rests on the table.

    • Turn the Mode dial to [A] to verify that the control panel shows a full power indicator.

결론

To reassemble your device, follow these instructions in reverse order.

Cory Layman

회원 가입일: 2011년 10월 04일

89 평판

안내서 3개 작성하였습니다

UW Stout, Team 1-5, Zhou Fall 2011 UW Stout, Team 1-5, Zhou Fall 2011 회원

UWSTOUT-ZHOU-F11S1G5

5 회원들

안내서 3개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 1

전체 시간: 1,481