주요 콘텐츠로 건너뛰기

Nikon Coolpix B700 Back Frame Assembly Replacement

필요한 것

  1. Nikon Coolpix B700 Back Frame Assembly Replacement, Back Frame Assembly: 1 단계, 이미지 1/1
    • Use the Phillips screwdriver to remove the two 5.5 mm screws on the left side of the camera.

  2. Nikon Coolpix B700 Back Frame Assembly Replacement: 2 단계, 이미지 1/1
    • Use the Phillips screwdriver to remove seven 5.5 mm screws from the bottom of the camera.

  3. Nikon Coolpix B700 Back Frame Assembly Replacement: 3 단계, 이미지 1/2 Nikon Coolpix B700 Back Frame Assembly Replacement: 3 단계, 이미지 2/2
    • Use the Phillips screwdriver to remove the two 5.5mm screws on the right side of the camera.

    • Open the HDMI flap to remove a 5.5mm screw.

    • Don't forget to replace the hidden screw under the HDMI flap during reassembly.

  4. Nikon Coolpix B700 Back Frame Assembly Replacement: 4 단계, 이미지 1/1
    • Use the Phillips screwdriver to remove the two 5.5mm screws under the LCD panel.

  5. Nikon Coolpix B700 Back Frame Assembly Replacement: 5 단계, 이미지 1/3 Nikon Coolpix B700 Back Frame Assembly Replacement: 5 단계, 이미지 2/3 Nikon Coolpix B700 Back Frame Assembly Replacement: 5 단계, 이미지 3/3
    • Open the flash assembly and insert the spudger into the slot under the flash unit and twist.

    • While twisting, pry apart the shell to split the camera in half.

  6. Nikon Coolpix B700 Back Frame Assembly Replacement: 6 단계, 이미지 1/1
    • Be careful not to damage the ribbons that connect the halves together.

  7. Nikon Coolpix B700 Back Frame Assembly Replacement: 7 단계, 이미지 1/2 Nikon Coolpix B700 Back Frame Assembly Replacement: 7 단계, 이미지 2/2
    • Place the pry tool under the black latch. Lift gently until the latch flips up.

    • Gently pull the ribbon away from the latch.

    • Be gentle when taking ribbons out and apart because they are fragile.

결승점

다른 2명이 해당 안내서를 완성하였습니다.

Carlos Salgado

회원 가입일: 02/27/19

1,429 평판

안내서 7개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 1

7일 전: 2

30일 전: 5

전체 시간: 651