주요 콘텐츠로 건너뛰기

소개

Use this guide to replace the LCD.

부품

지정된 부품이 없습니다.

  1. Clearly visible damage to the LCD. It did not even light up. Remove the screw from the right side. Remove the visible screw from the left side.
    • Clearly visible damage to the LCD. It did not even light up.

    • Remove the screw from the right side.

    • Remove the visible screw from the left side.

  2. Open the USB A/C cover, there is one more screw that needs to be removed. That is why it is important to always remove all covers... Remove the three screws from the bottom. Start splitting the case from the battery compartment. I used an opening tool, but fingernails will be sufficient as well.
    • Open the USB A/C cover, there is one more screw that needs to be removed. That is why it is important to always remove all covers...

    • Remove the three screws from the bottom.

    • Start splitting the case from the battery compartment. I used an opening tool, but fingernails will be sufficient as well.

  3. iPhone X Fix Kits

    Warranty up? No worries, we’ve got the fix.

    지금 장보기

    iPhone X Fix Kits

    Warranty up? No worries, we’ve got the fix.

    지금 장보기
  4. After the splitting of the case, the LCD is imediately visible. Lift the LCD out of the frame by using your fingernail or an opening tool. Do not remove it yet, it is still connected. Flip the black clasp up by using fingernails or the opening tool. No big force is required. Remove the old LCD.
    • After the splitting of the case, the LCD is imediately visible.

    • Lift the LCD out of the frame by using your fingernail or an opening tool. Do not remove it yet, it is still connected.

    • Flip the black clasp up by using fingernails or the opening tool. No big force is required. Remove the old LCD.

  5. Here is the new screen, note the blue tab. This is the screen protector, remove it after installation. Reassemble in reverse order. Hopefully your results will be the same as for me.
    • Here is the new screen, note the blue tab. This is the screen protector, remove it after installation.

    • Reassemble in reverse order. Hopefully your results will be the same as for me.

결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

oldturkey03

회원 가입일: 2010년 09월 29일

598,236 평판

안내서 102개 작성하였습니다

OTS OTS 회원

Business

1 회원

안내서 130개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 1

지난 30일: 15

전체 시간: 2,375