기기를 수리하세요 커뮤니티 상점

Nikon Coolpix L830 LCD Monitor Connecting Arm Replacement

소개

This guide describes the steps necessary to remove and replace the LCD Monitor Connecting Arm of a Nikon Coolpix L830 camera.

필요한 것

  1. Nikon Coolpix L830 LCD Monitor Connecting Arm Replacement, Back Casing: 1 단계, 이미지 1/1

    • Use a Phillips #000 screwdriver to unscrew the two 3.0mm Phillips screws located on the side of the camera with the HDMI port.

    • The HDMI port side will be on the left if you are looking at the back of the camera with the LCD monitor.

    • One screw is located under the gray flap.

    편집

  2. Nikon Coolpix L830 LCD Monitor Connecting Arm Replacement: 2 단계, 이미지 1/1

    • Unscrew the five 3.0mm Phillips #000 screws that are located on the bottom side of the camera.

    편집

  3. Nikon Coolpix L830 LCD Monitor Connecting Arm Replacement: 3 단계, 이미지 1/1

    • Unscrew the 4.0mm Phillips #000 screw located underneath the grey flap on the side of the camera with the "DC IN 5.0 V" marker.

    • This will be on the right if you are looking at the back LCD monitor side.

    • Unscrew the exposed 3.0mm Phillips #000 screw on the same side.

    편집

  5. Nikon Coolpix L830 LCD Monitor Connecting Arm Replacement: 4 단계, 이미지 1/1

    • Press the flash button to open the flash component.

    • Remove the 3.0mm Phillips #000 screw located directly in-between the two arms.

    편집

  6. Nikon Coolpix L830 LCD Monitor Connecting Arm Replacement: 5 단계, 이미지 1/1

    • Open the LCD monitor to reveal two 2.0mm Phillips screws.

    • Remove the 2.0mm Phillips #000 screws.

    편집

  7. Nikon Coolpix L830 LCD Monitor Connecting Arm Replacement: 6 단계, 이미지 1/2 Nikon Coolpix L830 LCD Monitor Connecting Arm Replacement: 6 단계, 이미지 2/2

    • Make sure to open the plastic grey flaps on either side of the camera before proceeding with this step.

    • Insert a plastic opening tool between the back and front surface components of the camera.

    • Wiggle the plastic opening tool backwards and forwards along the top edge until the back surface comes off.

    • Remove the back casing gently to not damage the LCD ribbon connector or inner camera components.

    편집

  8. Nikon Coolpix L830 LCD Monitor Connecting Arm Replacement: 7 단계, 이미지 1/2 Nikon Coolpix L830 LCD Monitor Connecting Arm Replacement: 7 단계, 이미지 2/2

    • Gently pull the LCD ribbon connector up to allow the back casing to be completely removed.

    편집

  9. Nikon Coolpix L830 LCD Monitor Connecting Arm Replacement, LCD Connecting Arm: 8 단계, 이미지 1/1

    • On the inside of the back cover, remove the two 2.0mm Phillips screws surrounding the connecting cable.

    편집

  10. Nikon Coolpix L830 LCD Monitor Connecting Arm Replacement: 9 단계, 이미지 1/1

    • Gently pull the ribbon connector in order to remove the complete LCD Monitor Connecting Arm.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 3명과 함께

Alex Delony

회원 가입일: 11/01/16

184 평판

안내서 1개 작성함

배지: 6

배지 +3개 더

팀

Baylor, Team 4-4, Williams Fall 2016 Baylor, Team 4-4, Williams Fall 2016 회원

BU-WILLIAMS-F16S4G4

3 회원들

안내서 10개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 3

전체 시간: 474