주요 콘텐츠로 건너뛰기

소개

This guide details the steps required to replace buttons on the back face of the camera. Please use this guide only when a specific button is not working. When the problem involves other parts of the camera or all of the buttons, you may need to replace a component of the circuit board.

  1. Unscrew all eight black, 4mm screws with a Philips 000. (The top-most screw shown in the third image can be accessed by lifting the cover flap off.) Unscrew all eight black, 4mm screws with a Philips 000. (The top-most screw shown in the third image can be accessed by lifting the cover flap off.) Unscrew all eight black, 4mm screws with a Philips 000. (The top-most screw shown in the third image can be accessed by lifting the cover flap off.)
    • Unscrew all eight black, 4mm screws with a Philips 000. (The top-most screw shown in the third image can be accessed by lifting the cover flap off.)

  2. Pry case open with a metal spludger by slipping the spludger between the back and front case of the camera and wiggling the spludger forwards and backwards.
    • Pry case open with a metal spludger by slipping the spludger between the back and front case of the camera and wiggling the spludger forwards and backwards.

    • Be careful not to damage the inner components of the camera when slipping the spludger into the camera.

  3. iPhone X Fix Kits

    Warranty up? No worries, we’ve got the fix.

    지금 장보기

    iPhone X Fix Kits

    Warranty up? No worries, we’ve got the fix.

    지금 장보기
  4. Carefully unhook the silver strip with tweezers. Get a grasp of the sides of the silver strip with the tweezers, and pull upwards and out. The strip may also be identified by its blue tip, which becomes more visible once pulled out.
    • Carefully unhook the silver strip with tweezers. Get a grasp of the sides of the silver strip with the tweezers, and pull upwards and out.

    • The strip may also be identified by its blue tip, which becomes more visible once pulled out.

  5. Unscrew the two, right-most, 2 mm screws with a Philips 000.
    • Unscrew the two, right-most, 2 mm screws with a Philips 000.

    • Unscrew the left-most, 4 mm screw with a Philips 000.

  6. Slide off the button panel in the marked direction.
    • Slide off the button panel in the marked direction.

  7. Flip  to the front side of the button panel to access the button sensors.
    • Flip to the front side of the button panel to access the button sensors.

결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

Abraham Lozano

회원 가입일: 2016년 04월 11일

568 평판

안내서 4개 작성하였습니다

Cal Poly, Team 1-11, Maness Spring 2016 Cal Poly, Team 1-11, Maness Spring 2016 회원

CPSU-MANESS-S16S1G11

4 회원들

안내서 5개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 1

지난 30일: 15

전체 시간: 1,115