주요 콘텐츠로 건너뛰기

소개

The user will learn how to replace the selector button set including the menu, home, and back buttons on the Nikon Coolpix S800c. This replacement may be necessary due to damage on the unit.

  1. Remove all 4 screws from the bottom face of the camera using a Phillips #00 head screwdriver (found in iFixit tool kit). Remove all 4 screws from the bottom face of the camera using a Phillips #00 head screwdriver (found in iFixit tool kit).
    • Remove all 4 screws from the bottom face of the camera using a Phillips #00 head screwdriver (found in iFixit tool kit).

  2. Using a plastic tool, pry open the back panel of the camera. Be careful not to apply too much force and damage the camera. Using a plastic tool, pry open the back panel of the camera. Be careful not to apply too much force and damage the camera.
    • Using a plastic tool, pry open the back panel of the camera. Be careful not to apply too much force and damage the camera.

  3. Isolate the back panel/touch screen section. Using a Phillips #00 head screwdriver (found in iFixit tool kit), remove the 2 screws that secure the metal plate protecting the selector buttons.
    • Isolate the back panel/touch screen section.

    • Using a Phillips #00 head screwdriver (found in iFixit tool kit), remove the 2 screws that secure the metal plate protecting the selector buttons.

    • Pry the small metal plate up with a plastic tool of your choice.

  4. Remove the selector button chain by prying it up with plastic tool of your choice. Remove the selector button chain by prying it up with plastic tool of your choice.
    • Remove the selector button chain by prying it up with plastic tool of your choice.

결론

To reassemble your device, follow these instructions in reverse order.

Erik Knapton

회원 가입일: 2018년 01월 30일

222 평판

안내서 2개 작성하였습니다

Baylor, Team S2-G6, Johnson Spring 2018 Baylor, Team S2-G6, Johnson Spring 2018 회원

BU-JOHNSON-S18S2G6

3 회원들

안내서 5개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 2

전체 시간: 54