필요한 것
-
-
-
Use a spudger to lift the black tab on the ZIF connector.
-
Disconnect the ribbon cables from their respective ZIF connectors on the logic board.
-
거의 끝나갑니다!
To reassemble your device, follow these instructions in reverse order.
결론
To reassemble your device, follow these instructions in reverse order.
다른 8명이 해당 안내서를 완성하였습니다.
댓글 2개
good guidance,easy to follow,thanks
I want to replace my Nikon D90 DSLR bad LCD, this guide will save me from costly repairs.