기기를 수리하세요 커뮤니티 상점

Nikon N80 Lens Mount (aka Bayonet Mount) Replacement

소개

Is the lens mount in your camera damaged or broken? It might be time to replace it with a new one! This guide will explain how to replace the lens mount (also known as bayonet mount) in a Nikon N80/F80 Camera.

필요한 것

  1. Nikon N80 Lens Mount (aka Bayonet Mount) Replacement, Lens Mount (aka Bayonet Mount): 1 단계, 이미지 1/1

    • Make sure the On/Off switch is in the Off position.

    편집

  2. Nikon N80 Lens Mount (aka Bayonet Mount) Replacement: 2 단계, 이미지 1/1

    • Place the camera so the lens is facing up.

    • If your camera has a lens on, remove it by pushing and holding the lens release button and turning the lens clockwise until it comes off.

    편집

  4. Nikon N80 Lens Mount (aka Bayonet Mount) Replacement: 3 단계, 이미지 1/1

    • Use a PH00 Phillips screwdriver to remove the five 4.8mm screws on the silver lens mount.

    편집

  5. Nikon N80 Lens Mount (aka Bayonet Mount) Replacement: 4 단계, 이미지 1/1

    • Remove the old lens mount and place the new one on.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 4명과 함께

Maegan Viloria

회원 가입일: 09/14/15

717 평판

안내서 5개 작성하였습니다

배지: 8

배지 +5개 더

팀

CSU Fullerton, Team 1-7, Bruce Fall 2015 CSU Fullerton, Team 1-7, Bruce Fall 2015 회원

CSUF-BRUCE-F15S1G7

3 회원들

안내서 10개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 2

7일 전: 17

30일 전: 47

전체 시간: 1,980