기기를 수리하세요 커뮤니티 상점

Ninja Coffee Bar CF080 Brewer Head Replacement

소개

This guide will show how to remove the brewer head from the coffee machine.

필요한 것

  1. Ninja Coffee Bar CF080 Brewer Head Replacement, Brewer Head: 1 단계, 이미지 1/1

    • Face the coffee machine in front of you.

    • Make sure that the coffee machine is unplugged.

    • Remove the glass carafe as it will not be needed.

    편집

  2. Ninja Coffee Bar CF080 Brewer Head Replacement: 2 단계, 이미지 1/1

    • Firmly grab the tab sticking out from the head of the brewer.

    편집

  3. Ninja Coffee Bar CF080 Brewer Head Replacement: 3 단계, 이미지 1/3 Ninja Coffee Bar CF080 Brewer Head Replacement: 3 단계, 이미지 2/3 Ninja Coffee Bar CF080 Brewer Head Replacement: 3 단계, 이미지 3/3

    • With little force, pull the tab of the brewer head in reverse direction.

    편집

  4. Ninja Coffee Bar CF080 Brewer Head Replacement: 4 단계, 이미지 1/1

    • Slide off the head in the direction away from the machine.

    • If the head does not come off smoothly by sliding, give a firm tug in the same direction.

    편집

  6. Ninja Coffee Bar CF080 Brewer Head Replacement: 5 단계, 이미지 1/3 Ninja Coffee Bar CF080 Brewer Head Replacement: 5 단계, 이미지 2/3 Ninja Coffee Bar CF080 Brewer Head Replacement: 5 단계, 이미지 3/3

    • Hold the head in the same position and lift it forward until the Ninja is facing upward toward the ceiling.

    편집

  7. Ninja Coffee Bar CF080 Brewer Head Replacement: 6 단계, 이미지 1/1

    • Now the brewer head is positioned to where you can seeing the bottom.

    편집

  8. Ninja Coffee Bar CF080 Brewer Head Replacement: 7 단계, 이미지 1/2 Ninja Coffee Bar CF080 Brewer Head Replacement: 7 단계, 이미지 2/2

    • Remove the screw with a Phillips #1 screwdriver.

    • Use Phillips #1 screwdriver.

    • Along will come a small black screw cover and spring

    편집

  9. Ninja Coffee Bar CF080 Brewer Head Replacement: 8 단계, 이미지 1/1

    • Twist the black lid on top clockwise until it is completely detached.

    편집

  10. Ninja Coffee Bar CF080 Brewer Head Replacement: 9 단계, 이미지 1/1

    • With the black upper lid detached, a smaller black cover can be removed without effort.

    편집

  11. Ninja Coffee Bar CF080 Brewer Head Replacement: 10 단계, 이미지 1/2 Ninja Coffee Bar CF080 Brewer Head Replacement: 10 단계, 이미지 2/2

    • Remove the 6 screws from the seal with a Phillips #1 screwdriver.

    편집

  12. Ninja Coffee Bar CF080 Brewer Head Replacement: 11 단계, 이미지 1/1

    • Once all screws are detached from the brewer head, it will be separated into two pieces leaving the filter.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 5명과 함께

Elizabeth Nguyen

회원 가입일: 09/11/17

416 평판

안내서 3개 작성하였습니다

배지: 7

배지 +4개 더

팀

CSU Fullerton, Team S1-G1, Bruce Fall 2017 CSU Fullerton, Team S1-G1, Bruce Fall 2017 회원

CSUF-BRUCE-F17S1G1

4 회원들

안내서 5개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 1

7일 전: 4

30일 전: 9

전체 시간: 1,003