기기를 수리하세요 커뮤니티 상점

Ninja Kitchen System Pulse Motor Replacement

소개

You will learn how to remove the motor from the base to check for frayed wires and/or loose screws.

필요한 것

  1. Ninja Kitchen System Pulse Motor Replacement, Base Disassembly: 1 단계, 이미지 1/1

    • Take out the three 15 mm Phillips #1 screws.

    • Remove the 15mm T10 screw.

    • Place the 4 screws on the magnetic mat.

    편집

  2. Ninja Kitchen System Pulse Motor Replacement: 2 단계, 이미지 1/1

    • Remove the gray base by lifting upwards and placing to the side.

    편집

  4. Ninja Kitchen System Pulse Motor Replacement, Motor: 3 단계, 이미지 1/1

    • Remove the three 15 mm Phillips #1 screws.

    • Place screws on magnetic mat.

    편집

  5. Ninja Kitchen System Pulse Motor Replacement: 4 단계, 이미지 1/1

    • Remove the motor by gently lifting up. Be careful with the cords, as they may be tangled.

    • This is the entire motor for the Ninja. If you have access to a spare motor, simply swap out the motors.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

다른 2명이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 4명과 함께

DJ

회원 가입일: 01/20/16

122 평판

안내서 1개 작성함

배지: 4

+1개 배지 추가

팀

USF Tampa, Team 15-1, Remmell Spring 2016 USF Tampa, Team 15-1, Remmell Spring 2016 회원

USFT-REMMELL-S16S15G1

3 회원들

안내서 5개 작성하였습니다

댓글 한 개

Dear sir my ninga kitchen system 1100 (blender machine) motor rod is broken i need help to replace it where i can get the rod or repair shop near me thank you

Noman - 답글

댓글 쓰기

조회 통계:

24 시간 전: 1

7일 전: 2

30일 전: 10

전체 시간: 4,281