기기를 수리하세요 커뮤니티 상점

Ninja Professional Blender BL660 Blender Base Replacement

소개

This guide will show how to remove the outer and inner blender base and sections from your Ninja Professional Blender BL660 Blender. This will allow you to get access to the inner components.

필요한 것

  1. Ninja Professional Blender BL660 Blender Base Replacement, Blender Base: 1 단계, 이미지 1/2 Ninja Professional Blender BL660 Blender Base Replacement, Blender Base: 1 단계, 이미지 2/2

    • Using the Phillips #1 screwdriver, remove the 5 screws (13mm long, 6mm wide) holding the outer base.

    • Lift the base up to remove it.

    편집

  2. Ninja Professional Blender BL660 Blender Base Replacement: 2 단계, 이미지 1/2 Ninja Professional Blender BL660 Blender Base Replacement: 2 단계, 이미지 2/2

    • Remove the midsection by pulling it up. If the section is stuck, use the iFixit plastic opening tool to pry it off.

    • Pull the power cord through the mid-section opening.

    편집

  4. Ninja Professional Blender BL660 Blender Base Replacement: 3 단계, 이미지 1/2 Ninja Professional Blender BL660 Blender Base Replacement: 3 단계, 이미지 2/2

    • Using the Phillips #1 screwdriver, remove the 6 screws (13 mm long, 6 mm wide).

    편집

  5. Ninja Professional Blender BL660 Blender Base Replacement: 4 단계, 이미지 1/2 Ninja Professional Blender BL660 Blender Base Replacement: 4 단계, 이미지 2/2

    • Using the Phillips #1 screwdriver, remove the two screws (5 mm long, 3 mm wide) holding the power cord onto the motor cover.

    편집

  6. Ninja Professional Blender BL660 Blender Base Replacement: 5 단계, 이미지 1/2 Ninja Professional Blender BL660 Blender Base Replacement: 5 단계, 이미지 2/2

    • Using the iFixit plastic opening tool, pry the motor cover off the general housing. Once it is loose, lift it up to remove it off the base.

    • Slide the cover all the way to the end of the power cord.

    • Please note that the power cord does not completely come off the cover.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 5명과 함께

JOHN KIMANI

회원 가입일: 09/22/17

119 평판

안내서 1개 작성함

배지: 10

배지 +7개 더

팀

Central Washington University, Team S1-G1, Pengilly Fall 2017 Central Washington University, Team S1-G1, Pengilly Fall 2017 회원

CWU-PENGILLY-F17S1G1

4 회원들

안내서 9개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 5

7일 전: 15

30일 전: 73

전체 시간: 2,821