기기를 수리하세요 커뮤니티 상점

Ninja Ultima BL810 Power Plug Replacement

소개

This guide will demonstrate how to disconnect the power plug.

필요한 것

  1. Ninja Ultima BL810 Power Plug Replacement, Power Plug: 1 단계, 이미지 1/3 Ninja Ultima BL810 Power Plug Replacement, Power Plug: 1 단계, 이미지 2/3 Ninja Ultima BL810 Power Plug Replacement, Power Plug: 1 단계, 이미지 3/3

    • Unscrew the Phillips #0 11mm screws.

    • Unscrew the Torx Security #10 11mm screw.

    편집

  2. Ninja Ultima BL810 Power Plug Replacement: 2 단계, 이미지 1/2 Ninja Ultima BL810 Power Plug Replacement: 2 단계, 이미지 2/2

    • Unscrew the six Phillips #2 11mm screws from the remainder of the bottom plate.

    • Pull the bottom covering off of the blender.

    편집

  3. Ninja Ultima BL810 Power Plug Replacement: 3 단계, 이미지 1/2 Ninja Ultima BL810 Power Plug Replacement: 3 단계, 이미지 2/2

    • Unscrew the two Phillips #2 9mm screws.

    • Remove the plastic block.

    편집

  5. Ninja Ultima BL810 Power Plug Replacement: 4 단계, 이미지 1/3 Ninja Ultima BL810 Power Plug Replacement: 4 단계, 이미지 2/3 Ninja Ultima BL810 Power Plug Replacement: 4 단계, 이미지 3/3

    • Unscrew the four Phillips #2 11mm screws.

    • Remove the plastic covers.

    • Removing the top cover and then rotating the bottom cover into the same orientation works best.

    편집

  6. Ninja Ultima BL810 Power Plug Replacement: 5 단계, 이미지 1/1

    • Unscrew the three Phillips #2 9mm screws.

    • This metal plate doesn't need to be completely removed, just adjusted to the side to continue working.

    편집

  7. Ninja Ultima BL810 Power Plug Replacement: 6 단계, 이미지 1/3 Ninja Ultima BL810 Power Plug Replacement: 6 단계, 이미지 2/3 Ninja Ultima BL810 Power Plug Replacement: 6 단계, 이미지 3/3

    • Unscrew the four Phillips #2 11mm screws.

    • Pull the power cord through as shown to create slack.

    • Remove plastic casing by lifting upwards.

    편집

  8. Ninja Ultima BL810 Power Plug Replacement: 7 단계, 이미지 1/3 Ninja Ultima BL810 Power Plug Replacement: 7 단계, 이미지 2/3 Ninja Ultima BL810 Power Plug Replacement: 7 단계, 이미지 3/3

    • Follow the power plug cords to find the right plastic caps.

    • Squeeze the caps with pliers to loosen the grip.

    • Pull the plastic caps off the twisted wires.

    편집

  9. Ninja Ultima BL810 Power Plug Replacement: 8 단계, 이미지 1/3 Ninja Ultima BL810 Power Plug Replacement: 8 단계, 이미지 2/3 Ninja Ultima BL810 Power Plug Replacement: 8 단계, 이미지 3/3

    • Untwist the two wires from each other and pull the zip tie off.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 5명과 함께

Ryan James Gilroy

회원 가입일: 09/27/17

364 평판

안내서 3개 작성하였습니다

배지: 8

배지 +5개 더

팀

Cal Poly, Team S9-G4, Banghart Fall 2017 Cal Poly, Team S9-G4, Banghart Fall 2017 회원

CPSU-BANGHART-F17S9G4

4 회원들

안내서 5개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 3

7일 전: 3

30일 전: 7

전체 시간: 614