기기를 수리하세요 커뮤니티 상점

Nintendo DSi XL Stylus Housing Replacement

소개

Is your stylus stuck? We're here to help.

필요한 것

  1. Nintendo DSi XL Stylus Housing Replacement, Battery: 1 단계, 이미지 1/2 Nintendo DSi XL Stylus Housing Replacement, Battery: 1 단계, 이미지 2/2

    • Remove the two Phillips screws securing the battery cover to the back of the handheld console.

    • Lift the battery cover off the back of the DSi XL.

    편집

  2. Nintendo DSi XL Stylus Housing Replacement: 2 단계, 이미지 1/1

    • Lift the battery from the DSi XL.

    편집

  3. Nintendo DSi XL Stylus Housing Replacement, Lower Case: 3 단계, 이미지 1/3 Nintendo DSi XL Stylus Housing Replacement, Lower Case: 3 단계, 이미지 2/3 Nintendo DSi XL Stylus Housing Replacement, Lower Case: 3 단계, 이미지 3/3

    • Remove the four rubber screw covers on the lower case by prying them up with a push pin.

    편집

  4. Nintendo DSi XL Stylus Housing Replacement: 4 단계, 이미지 1/1

    • Remove the following seven Phillips screws that secure the lower case to the rest of the DSi XL:

    • Four silver 5.3 mm screws

    • Two black 5.3 mm screws

    • One black 2.5 mm screw

    편집

  6. Nintendo DSi XL Stylus Housing Replacement: 5 단계, 이미지 1/3 Nintendo DSi XL Stylus Housing Replacement: 5 단계, 이미지 2/3 Nintendo DSi XL Stylus Housing Replacement: 5 단계, 이미지 3/3

    • Turn the DSi XL over, and open the display.

    • Insert a spudger between the upper and lower case at the bottom left corner of the DSi.

    • Slide the spudger along the bottom edge of the upper case to release the latches securing the upper case to the lower case.

    편집

  7. Nintendo DSi XL Stylus Housing Replacement: 6 단계, 이미지 1/2 Nintendo DSi XL Stylus Housing Replacement: 6 단계, 이미지 2/2

    • Close the display and turn the DSi XL over.

    • Lift the lower case from the front edge.

    • Rotate the lower case away from the DSi.

    • The lower case cannot be completely removed yet, since it is still connected to the motherboard.

    편집

  8. Nintendo DSi XL Stylus Housing Replacement: 7 단계, 이미지 1/2 Nintendo DSi XL Stylus Housing Replacement: 7 단계, 이미지 2/2

    • Using a spudger, pry the SD card/right shoulder button connector off its socket.

    • Pry the volume button/left shoulder button connector off its socket on the motherboard with a spudger.

    편집

  9. Nintendo DSi XL Stylus Housing Replacement, Right Shoulder Button: 8 단계, 이미지 1/3 Nintendo DSi XL Stylus Housing Replacement, Right Shoulder Button: 8 단계, 이미지 2/3 Nintendo DSi XL Stylus Housing Replacement, Right Shoulder Button: 8 단계, 이미지 3/3

    • Remove the two gold 4.0 mm Phillips screws securing the right shoulder button assembly to the back case.

    • Lift the right shoulder button assembly from the back case.

    • The components of the right shoulder button assembly:

    • Right shoulder button

    • Shoulder button spring

    • Retaining pin

    • Right shoulder button holding panel

    편집

  10. Nintendo DSi XL Stylus Housing Replacement, Stylus Housing: 9 단계, 이미지 1/1

    • Remove the stylus from its housing on the right side of the DSi XL.

    편집

  11. Nintendo DSi XL Stylus Housing Replacement: 10 단계, 이미지 1/3 Nintendo DSi XL Stylus Housing Replacement: 10 단계, 이미지 2/3 Nintendo DSi XL Stylus Housing Replacement: 10 단계, 이미지 3/3

    • Remove the three 4 mm gold Phillips screws securing the stylus housing to the lower case.

    • Using a spudger, lift the stylus housing off the lower case.

    • Remove the stylus housing from the handheld console.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

다른 4명이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 5명과 함께

Brett Hartt

회원 가입일: 04/12/10

127,876 평판

안내서 143개 작성하였습니다

배지: 52

배지 +49개 더

팀

iFixit iFixit 회원

Staff

135 회원들

안내서 16,732개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 1

7일 전: 4

30일 전: 22

전체 시간: 7,726