기기를 수리하세요 커뮤니티 상점

Nintendo Wii U Pro Controller D-Pad Replacement

소개

We pick up where we left off after removing the joysticks. To reach the D-Pad, we will first remove the motherboard.

필요한 것

  1. Nintendo Wii U Pro Controller D-Pad Replacement, Battery: 1 단계, 이미지 1/1

    • Turn the controller over to reveal the battery cover.

    • Use the J000 screwdriver to remove the screw that secures the battery cover.

    편집

  2. Nintendo Wii U Pro Controller D-Pad Replacement: 2 단계, 이미지 1/2 Nintendo Wii U Pro Controller D-Pad Replacement: 2 단계, 이미지 2/2

    • Remove the battery from the controller by inserting the plastic spudger into the small gap on the bottom right of the battery.

    • Use the spudger as a lever to pry up and remove the battery from the compartment.

    편집

  3. Nintendo Wii U Pro Controller D-Pad Replacement, Joystick: 3 단계, 이미지 1/1

    • Remove the eight 5.5 mm Y0 screws.

    편집

  4. Nintendo Wii U Pro Controller D-Pad Replacement: 4 단계, 이미지 1/2 Nintendo Wii U Pro Controller D-Pad Replacement: 4 단계, 이미지 2/2

    • Now that you have removed all of the screws, carefully separate and remove the bottom half of the controller shell from the top half.

    • If you feel any resistance when pulling the shells apart, use a spudger to separate the left and right trigger contact assemblies from the bottom shell.

    편집

  6. Nintendo Wii U Pro Controller D-Pad Replacement: 5 단계, 이미지 1/1

    • Move the right trigger and sensor out of the way.

    • Remove the 4 mm JIS #0 screw.

    편집

  7. Nintendo Wii U Pro Controller D-Pad Replacement: 6 단계, 이미지 1/1

    • Move the left trigger and sensor out of the way.

    • Remove the 4 mm JIS #0 screw.

    편집

  8. Nintendo Wii U Pro Controller D-Pad Replacement: 7 단계, 이미지 1/1

    • Remove the joysticks and motherboard from the controller’s shell.

    편집

  9. Nintendo Wii U Pro Controller D-Pad Replacement: 8 단계, 이미지 1/1

    • Carefully pull the rubber thumbsticks off of the electronic bearings to remove the joysticks.

    편집

  10. Nintendo Wii U Pro Controller D-Pad Replacement, D-Pad: 9 단계, 이미지 1/1

    • Locate the two 4 mm motherboard screws, shown circled in red, with the J0 screwdriver.

    편집

  11. Nintendo Wii U Pro Controller D-Pad Replacement: 10 단계, 이미지 1/1

    • Remove the motherboard and connected components. The rubber pad of the D-Pad is indicated in the image by the red arrow.

    편집

  12. Nintendo Wii U Pro Controller D-Pad Replacement: 11 단계, 이미지 1/1

    • Remove the rubber pad and D-Pad button. The D-Pad can be replaced by the new D-Pad or be cleaned to improve condition.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

다른 3명이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 5명과 함께

Jesse Burton

회원 가입일: 09/17/15

586 평판

안내서 3개 작성하였습니다

배지: 14

배지 +11개 더

팀

IUPUI, Team 2-2, Harley Fall 2015 IUPUI, Team 2-2, Harley Fall 2015 회원

IUPUI-HARLEY-F15S2G2

4 회원들

안내서 13개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 4

30일 전: 41

전체 시간: 4,418