소개

This guide is a step by step process to remove the battery of the phone. It is a preliminary step to many installation guides.

부품

부품은 필요하지 않습니다.

  1. Turn off the phone.
    • Turn off the phone.

    • Check if there is a microSD card in the slot behind the door on the side. If so, remove it by first pushing it in, then pulling it out.

    • Position the phone so that the back side is in view.

  2. US$100 이상 또는 Pro Tech Toolkit을 포함한 모든 주문의 배송은 무료입니다!

    상점 둘러보기
  3. Remove the back battery cover. Apply pressure on the cover while simultaneously sliding the cover downward. Apply pressure on the cover while simultaneously sliding the cover downward.
    • Remove the back battery cover.

    • Apply pressure on the cover while simultaneously sliding the cover downward.

  4. Insert the iPod opening tool between the base of the phone and the phone battery. Position the phone so that the battery won't fall out of the phone. The battery lifts out of the phone fast and easily.
    • Insert the iPod opening tool between the base of the phone and the phone battery.

    • Position the phone so that the battery won't fall out of the phone.

    • The battery lifts out of the phone fast and easily.

    • Carefully lift the battery out of the phone.

결론

To reassemble your device, follow these instructions in reverse order.

Andrea

회원 가입일: 2010년 04월 15일

70 평판

안내서 5개 작성하였습니다

Cal Poly, Team 26-30, Regan Spring 2010 Cal Poly, Team 26-30, Regan Spring 2010 회원

CPSU-REGAN-S10S26G30

4 회원들

안내서 17개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 1

전체 시간: 3,678