소개
Replacing the PCB or logic board of the phone.
필요한 것
-
-
Turn off the phone.
-
Check if there is a microSD card in the slot behind the door on the side. If so, remove it by first pushing it in, then pulling it out.
-
Position the phone so that the back side is in view.
-
-
-
Turn the phone so that the back of the phone is facing forward.
-
The picture to the left shows the location of the plastic tabs that attach to the upper cover of the phone.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
다른 한 분이 해당 안내서를 완성하였습니다.