소개

This guide requires that the front plate, keypad, circuit board, back cover, and battery all be removed.

부품

부품은 필요하지 않습니다.

  1. Pull up on both of the clips near the bottom of the phone as shown.
    • Pull up on both of the clips near the bottom of the phone as shown.

    • Lift off the front plate.

    댓글 쓰기

  2. The keypad and LCD screen are revealed.
    • The keypad and LCD screen are revealed.

    댓글 쓰기

    • Separate the keypad from the phone and place aside.

    • Wipe off any excess dust from where the keypad was attached to the phone.

    댓글 쓰기

    • Remove the six screws highlighted by the markers using the screwdriver.

    댓글 쓰기

    • Separate the inside of the phone from the back of the phone.

    댓글 쓰기

    • Locate vibration device on the bottom of the back cover.

    • Pull up on the vibration device using tweezers.

    • Remove the vibration device and place it aside.

    댓글 쓰기

결론

To reassemble your device, follow these instructions in reverse order.

Reid Polstra

회원 가입일: 2012년 10월 22일

1 평판

안내서 7개 작성하였습니다

Clemson, Team 15-5, Benson Fall 2012 Clemson, Team 15-5, Benson Fall 2012 회원

CLEM-BENSON-F12S15G5

3 회원들

안내서 7개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 1

전체 시간: 437