메인 콘텐츠로 스킵하기

소개

This Guide will show how the remove the phone's battery charger connector.

부품

지정된 부품이 없습니다.

  1. Press the button to remove the back cover. Pull the cover downward and lift it off while still pressing the button.
    • Press the button to remove the back cover.

    • Pull the cover downward and lift it off while still pressing the button.

  2. Lift the battery out of the phone by pushing down from the top and pulling out
    • Lift the battery out of the phone by pushing down from the top and pulling out

  3. Grip the front cover from the bottom.
    • Grip the front cover from the bottom.

  4. Lift the front cover off.
    • Lift the front cover off.

  5. Locate 6 screws on front of assembly and unscrew them using a T6 torx screwdriver.
    • Locate 6 screws on front of assembly and unscrew them using a T6 torx screwdriver.

  6. Insert spudger along edge of assembly and gently lift assembly away from case
    • Insert spudger along edge of assembly and gently lift assembly away from case

  7. Remove assembly from phone
    • Remove assembly from phone

  8. The logic board now sits on top of the phone.
    • The logic board now sits on top of the phone.

  9. Lift the logic board out of the phone.
    • Lift the logic board out of the phone.

  10. Locate battery charger connector
    • Locate battery charger connector

  11. Grasp top and bottom of battery charger connector on the left side
    • Grasp top and bottom of battery charger connector on the left side

  12. Lift out the battery charger connector
    • Lift out the battery charger connector

결론

To reassemble your device, follow these instructions in reverse order.

Colby Leslie

회원 가입일: 2010년 10월 05일

1 평판

안내서 7개 작성하였습니다

Cal Poly, Team 22-3, Maness Fall 2010 Cal Poly, Team 22-3, Maness Fall 2010 회원

CPSU-MANESS-F10S22G3

4 회원들

안내서 9개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 0

전체 시간: 1,799