주요 콘텐츠로 건너뛰기

이 안내서에는 최근 변경 사항이 더 있습니다. 최신 비검증 버전으로 전환하십시오.

Nokia 8260 LCD Replacement

필요한 것

  1. Nokia 8260 LCD Replacement, Battery: 1 단계, 이미지 1/1
    • Turn off the cell phone.

  2. Nokia 8260 LCD Replacement: 2 단계, 이미지 1/1
    • Press down on the round button on the back cover of the phone.

  3. Nokia 8260 LCD Replacement: 3 단계, 이미지 1/1
    • Slide the back cover down while still pressing the button.

  4. Nokia 8260 LCD Replacement: 4 단계, 이미지 1/1
    • Remove the back cover.

  5. Nokia 8260 LCD Replacement: 5 단계, 이미지 1/1
    • Press the end of the battery towards the top of the phone.

  6. Nokia 8260 LCD Replacement: 6 단계, 이미지 1/1
    • Lift the battery outwards while still pressing it upwards till it pops out.

    • You may need to take several attempts to lift out the battery.

  7. Nokia 8260 LCD Replacement, Antenna: 7 단계, 이미지 1/1
    • Squeeze the flat end of the spudger into the crack right under the word "Nokia" on the back of the phone.

    • This step may be a bit difficult if you are removing the antenna for the first time.

  8. Nokia 8260 LCD Replacement: 8 단계, 이미지 1/1
    • Pry open the antenna door by pulling down the top of the spudger

  9. Nokia 8260 LCD Replacement: 9 단계, 이미지 1/1
    • Remove the antenna door.

  10. Nokia 8260 LCD Replacement: 10 단계, 이미지 1/1
    • If the gold antenna remained stuck to the door, you have finished removing the antenna from the phone.

    • If the gold antenna is still in the phone, carefully remove it and stick it onto the back of the door.

    • Try to keep the antenna as flat as possible. Do not bend it.

  11. Nokia 8260 LCD Replacement, Circuit Board: 11 단계, 이미지 1/1
    • Remove the five screws with the Torx Screwdriver: two near the bottom, two in the middle, and one under the antenna door.

    • The two bottom screws are longer than the upper three.

  12. Nokia 8260 LCD Replacement: 12 단계, 이미지 1/1
    • Remove the back covering.

  13. Nokia 8260 LCD Replacement: 13 단계, 이미지 1/1
    • Remove the two screws at the top.

  14. Nokia 8260 LCD Replacement: 14 단계, 이미지 1/1
    • Remove the metal plating and the circuit board.

    • There is nothing holding the rest of the phone together. Handle the rest of the phone carefully.

    • The LCD will be attached to the circuit board.

  15. Nokia 8260 LCD Replacement, LCD: 15 단계, 이미지 1/1
    • Detach the LCD from the logic board at the four metal hinges.

    • There are three pieces to the LCD: the front metal border, the LCD unit, and the plastic backing. Unless you are replacing the LCD, do not separate these three pieces.

결론

To reassemble your device, follow these instructions in reverse order.

Aaron Jen

회원 가입일: 04/11/10

1 평판

안내서 7개 작성하였습니다

Cal Poly, Team 27-94, Amido Spring 2010 Cal Poly, Team 27-94, Amido Spring 2010 회원

CPSU-AMIDO-S10S27G94

4 회원들

안내서 14개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 2

전체 시간: 2,892