주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

소개

To replace the Nokia X speaker; follow the steps below.

부품

  1. Remove the back cover of the device by applying light pressure toward the outer rim and display.
    • Remove the back cover of the device by applying light pressure toward the outer rim and display.

  2. Remove 7 (size 4 M1 4*3.5) and 4(size 6 M2 6*4.5) screws using P5 hex screwdriver.
    • Remove 7 (size 4 M1 4*3.5) and 4(size 6 M2 6*4.5) screws using P5 hex screwdriver.

    • The M2 screws are shown in red.

    • The M1 screws are shown in orange.

  3. SKIP THE UPGRADE

    Save by fixing with an all-in-one kit.

    Shop iPhone Fix Kits

    SKIP THE UPGRADE

    Save by fixing with an all-in-one kit.

    Shop iPhone Fix Kits
  4. Gently separate the display from the chassis.
    • Gently separate the display from the chassis.

    • Slowly spread the display and chassis until the inside of the device is reachable.

    • Do not pull apart.

    • Using the spudger tool, release the top flex ribbon from the light swap package.

  5. Use a nylon spudger to pry off the speaker and speaker gasket.
    • Use a nylon spudger to pry off the speaker and speaker gasket.

  6. Put a new speaker back into the speaker gasket.
    • Put a new speaker back into the speaker gasket.

결론

To reassemble your device, follow these instructions in reverse order.

다른 4명이 해당 안내서를 완성하였습니다.

Jose Maya

회원 가입일: 2017년 03월 04일

357 평판

안내서 2개 작성하였습니다

IUPUI, Team S7-G7, Wilson Spring 2017 IUPUI, Team S7-G7, Wilson Spring 2017 회원

IUPUI-WILSON-S17S7G7

3 회원들

안내서 5개 작성하였습니다

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 3

전체 시간: 496