취소

Numark TT1600 Belt Drive Replacement

작성자 Nikolai (또 다른 기여자 5명)

댓글 0
즐겨찾기 2
완료: 1

Numark TT1600 Belt Drive Replacement

난이도

쉬움

단계

7

소요 시간

5 - 10 분

소개

Make sure device is unplugged.

1 단계 Belt Drive

Remove slip mat from top of the platter.

Remove slip mat from top of the platter.

2 단계

Remove platter by inserting thumbs in holes and slowly pulling up.

Remove platter by inserting thumbs in holes and slowly pulling up.
There will be some initial resistance.

3 단계

Remove damaged belt which will be located below the platter.

Remove damaged belt which will be located below the platter.

4 단계

Install new belt by securing it around the inner ring, located on the back of the platter.

Install new belt by securing it around the inner ring, located on the back of the platter.

5 단계

Place a thumb in each hole.

Place a thumb in each hole.
You should be able to feel the rubber belt.
Gently pull the belt with each thumb, keeping the belt taut around the inner ring.

6 단계

Secure platter back on turntable while keeping belt taut.

Pull belt around motor spindle.

Secure platter back on turntable while keeping belt taut.
Pull belt around motor spindle.
Gently let go of belt.

7 단계

Test turntable by spinning the platter.

Test turntable by spinning the platter.
There should be slight tension causing the platter to come to a stop.

결승점

다른 한 분이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 5명과 함께

Nikolai

회원 가입일: 2011년 10월 12일

161 평판

안내서 5개 작성하였습니다

배지 +4개 더

팀

Cal Poly, Team 17-14, Regan Fall 2011 Cal Poly, Team 17-14, Regan Fall 2011 회원

CPSU-REGAN-F11S17G14

4 회원들

안내서 7개 작성하였습니다

댓글 0개

의견 추가하세요

조회 통계:

지난 24시간: 1

지난 7일: 8

지난 30일: 31

전체 시간: 3,528