Skip to main content

소개

Make sure device is unplugged.

  1. Remove slip mat from top of the platter.
    • Remove slip mat from top of the platter.

  2. Remove platter by inserting thumbs in holes and slowly pulling up.
    • Remove platter by inserting thumbs in holes and slowly pulling up.

    • There will be some initial resistance.

  3. Remove damaged belt which will be located below the platter.
    • Remove damaged belt which will be located below the platter.

  4. 맥북 배터리 수리 키트

    기본 가격은 $69.99

    Buy Now

    맥북 배터리 수리 키트

    기본 가격은 $69.99

    Buy Now
  5. Install new belt by securing it around the inner ring, located on the back of the platter.
    • Install new belt by securing it around the inner ring, located on the back of the platter.

  6. Place a thumb in each hole.
    • Place a thumb in each hole.

    • You should be able to feel the rubber belt.

    • Gently pull the belt with each thumb, keeping the belt taut around the inner ring.

  7. Secure platter back on turntable while keeping belt taut. Pull belt around motor spindle.
    • Secure platter back on turntable while keeping belt taut.

    • Pull belt around motor spindle.

    • Gently let go of belt.

  8. Test turntable by spinning the platter.
    • Test turntable by spinning the platter.

    • There should be slight tension causing the platter to come to a stop.

결승점

다른 한 분이 해당 안내서를 완성하였습니다.

Nikolai

회원 가입일: 2011년 10월 12일

161 평판

안내서 5개 작성하였습니다

Cal Poly, Team 17-14, Regan Fall 2011 Cal Poly, Team 17-14, Regan Fall 2011 회원

CPSU-REGAN-F11S17G14

4 회원들

안내서 7개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 7

지난 30일: 30

전체 시간: 3,527