소개
Suctions cups at the bottom of the base can deteriorate over time. This guide will demonstrate how to replace them.
필요한 것
-
이 단계에 사용된 도구:TR8 Torx Security Screwdriver$5.99
-
Turn the blender upside down.
-
Remove the six screws securing the bottom panel to the base of the blender:
-
Four 0.5 inch 5 gauge Phillips screws
-
Lift the bottom off of the base.
-
-
거의 끝나갑니다!
To reassemble your device, follow these instructions in reverse order.
결론
To reassemble your device, follow these instructions in reverse order.