Nvidia Shield Tablet Rear Case Replacement

작성자 Molly Bauer (또 다른 기여자 4명)

댓글 1
즐겨찾기 1
완료: 5

Nvidia Shield Tablet Rear Case Replacement

난이도

보통

단계

소요 시간

15 - 20 분

소개

The case of any device is always the first line of defense against any kind of external damage. The Shield Tablet in particular is known to be susceptible to casing cracks, specifically at the corners. This guide will show you the step-by-step instructions required to replace your cracked case.

도구

해당 도구 구매

Anti-Static Wrist Strap

$7.99

구매
Spudger

$3.99

구매

부품

지정된 부품이 없습니다.

1 단계 Rear Case

First, remove the stylus from your tablet.

First, remove the stylus from your tablet.

편집

2 단계

Set the tablet so the buttons, microSD, and stylus port are facing you.

Using the flat end of the spudger tool, carefully pry open the case starting from the microSD slot, slowly sliding the spudger along the inside edge of the case.

Set the tablet so the buttons, microSD, and stylus port are facing you.
Open the microSD slot.
Using the flat end of the spudger tool, carefully pry open the case starting from the microSD slot, slowly sliding the spudger along the inside edge of the case.
You may want to put on your anti-static wrist strap at this point as the motherboard will be vulnerable to physical touch and electrostatic shock after the casing is removed.