Oculus Rift CV1 Remote Button Replacement

소개

The purpose of this guide is to provide information on replacing the buttons on your Oculus Rift CV1 remote. You can learn more about the Oculus Rift CV1 on the device page. You will need a Phillips #000 screwdriver for this replacement. Ensure buttons are cleaned with an electronics safe cleaner before reassembly to prevent the buttons from sticking.

필요한 것

1 단계 Battery

Oculus Rift CV1 Remote Button Replacement, Battery: 1 단계, 이미지 1/3

Oculus Rift CV1 Remote Button Replacement, Battery: 1 단계, 이미지 2/3

Oculus Rift CV1 Remote Button Replacement, Battery: 1 단계, 이미지 3/3

Remove the back panel by firmly sliding it towards the strap.

번역하기

2 단계

Oculus Rift CV1 Remote Button Replacement: 2 단계, 이미지 3/3

Push down on the tab under the battery.
Firmly slide the battery away from you. The battery should unlatch from its previous position.
Once the battery is removed, release the tab.

번역하기

3 단계 Remote Button

Oculus Rift CV1 Remote Button Replacement, Remote Button: 3 단계, 이미지 1/1

Remove the four 4mm Phillips #000 screws from the back of the remote.

번역하기

4 단계

Gently lift the wrist strap to split the back panel into two.

번역하기

5 단계

Gently peel off the top of the control board.
Be gentle, if the buttons fall off, try to keep them in the orientation that they were in.
If the large black button falls off, place it back into the shell by orienting the tabs on the button to match the holes on the shell.