주요 콘텐츠로 건너뛰기

Olympus SZ-12 LCD Screen Replacement

필요한 것

  1. Olympus SZ-12 LCD Screen Replacement, Back Case: 1 단계, 이미지 1/2 Olympus SZ-12 LCD Screen Replacement, Back Case: 1 단계, 이미지 2/2
    • Remove nine 4.45mm Phillips #000 screws from the outside of the case.

  2. Olympus SZ-12 LCD Screen Replacement: 2 단계, 이미지 1/1
    • There are four screws to take out on the bottom of the camera.

  3. Olympus SZ-12 LCD Screen Replacement: 3 단계, 이미지 1/1
    • There are three screws to take out on this side.

  4. Olympus SZ-12 LCD Screen Replacement: 4 단계, 이미지 1/1
    • There is one screw to take out on this side.

  5. Olympus SZ-12 LCD Screen Replacement: 5 단계, 이미지 1/1
    • There is one hidden screw inside the HDMI port.

  6. Olympus SZ-12 LCD Screen Replacement: 6 단계, 이미지 1/1
    • Using the blue plastic opening tool, wedge open and remove the case.

  7. Olympus SZ-12 LCD Screen Replacement, LCD Screen: 7 단계, 이미지 1/1
    • Once you have the back case off, remove the LCD Screen.

  8. Olympus SZ-12 LCD Screen Replacement: 8 단계, 이미지 1/1
    • Using a plastic opening tool, gently lift the retaining flap on the display cable ZIF connector.

    • Pull the display cable from its socket on the motherboard.

  9. Olympus SZ-12 LCD Screen Replacement: 9 단계, 이미지 1/1
    • Remove the LCD screen from the device.

    • Be careful not to rip the display's ribbon cable as you pull the screen away from the device.

결론

To reassemble your device, follow these instructions in reverse order.

Samuel Hays

회원 가입일: 03/13/17

515 평판

안내서 4개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 5

30일 전: 10

전체 시간: 565