주요 콘텐츠로 건너뛰기

Olympus Stylus Tough-6000 Lens Cover Replacement

필요한 것

  1. Olympus Stylus Tough-6000 Lens Cover Replacement, Disassemble Camera.: 1 단계, 이미지 1/1
    • You will want to disassemble the camera to get to the Lens Cover.

  2. Olympus Stylus Tough-6000 Lens Cover Replacement: 2 단계, 이미지 1/1
    • There are two screws on the right side of the camera.

    • Use your Phillips #00 screwdriver and unscrew both screws.

  3. Olympus Stylus Tough-6000 Lens Cover Replacement: 3 단계, 이미지 1/1
    • On the left side of the camera there will be another set of screws.

    • Unscrew both screws with the same Phillips #00 screwdriver.

  4. Olympus Stylus Tough-6000 Lens Cover Replacement: 4 단계, 이미지 1/1
    • After unscrewing the screws on the left side of the camera you will notice a speaker hat.

    • You will be able to pull the speaker hat off.

    • You must pull the speaker hat off to be able to pry the front shell of the camera apart.

  5. Olympus Stylus Tough-6000 Lens Cover Replacement: 5 단계, 이미지 1/1
    • Grab your plastic opening tool and begin to pry off the front shell of the camera.

    • The front shell will easily come off after a couple of prys.

  6. Olympus Stylus Tough-6000 Lens Cover Replacement: 6 단계, 이미지 1/1
    • Once you have the camera shell cover off you can see the lens cover.

    • Unscrew the lens cover with your Phillips #00 screwdriver to replace it with a new lens cover.

결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

Shannon Cooney

회원 가입일: 01/15/15

355 평판

안내서 3개 작성하였습니다

USF Sarasota-Manatee, Team 1-1, Stewart Winter 2015 USF Sarasota-Manatee, Team 1-1, Stewart Winter 2015 회원

USFSM-STEWART-W15S1G1

4 회원들

안내서 10개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 2

7일 전: 4

30일 전: 15

전체 시간: 1,100