기기를 수리하세요 커뮤니티 상점

Olympus VR-350 Back Plate Replacement

소개

This guide will teach you how to remove and replace the camera's back plate. This can help you replace the plate if it is broken.

필요한 것

  1. Olympus VR-350 Back Plate Replacement, Front Plate: 1 단계, 이미지 1/2 Olympus VR-350 Back Plate Replacement, Front Plate: 1 단계, 이미지 2/2

    • Remove the two 4mm screws from each side of the camera with a Phillips PH000 screwdriver.

    번역하기

  2. Olympus VR-350 Back Plate Replacement: 2 단계, 이미지 1/1

    • Remove the four 4mm screws from the bottom of the camera with a Phillips PH000 screwdriver.

    번역하기

  4. Olympus VR-350 Back Plate Replacement: 3 단계, 이미지 1/3 Olympus VR-350 Back Plate Replacement: 3 단계, 이미지 2/3 Olympus VR-350 Back Plate Replacement: 3 단계, 이미지 3/3

    • Use the plastic opening tools and your fingers to pry the front plate from the camera.

    • You might need to open the battery cover to remove the front plate.

    번역하기

  5. Olympus VR-350 Back Plate Replacement, Back Plate: 4 단계, 이미지 1/2 Olympus VR-350 Back Plate Replacement, Back Plate: 4 단계, 이미지 2/2

    • Use your fingers to pry open the back cover.

    • When you remove the back of the camera, the button membrane might fall out. Don’t lose this sheet.

    • The LCD screen is connected to the body of the camera by an orange ribbon cable. Don’t pull this ribbon cable out.

    번역하기
결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 3명과 함께

Adri

회원 가입일: 02/23/15

456 평판

안내서 3개 작성하였습니다

배지: 12

배지 +9개 더

팀

USF Tampa, Team 1-3, Leahy Winter 2015 USF Tampa, Team 1-3, Leahy Winter 2015 회원

USFT-LEAHY-W15S1G3

3 회원들

안내서 10개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 3

30일 전: 7

전체 시간: 675