주요 콘텐츠로 건너뛰기

소개

For this quick and simple guide, we will be removing and reinstalling the wrist strap on a Omaker M4 portable speaker. This guide will be helpful for those who are looking to fix a broken wrist strap, or swap out the original for a different styled strap.

  1. Locate the designated attachment spot on the device. Feed the thin string loop under the plastic bridge through to the other side. Locate the designated attachment spot on the device. Feed the thin string loop under the plastic bridge through to the other side.
    • Locate the designated attachment spot on the device. Feed the thin string loop under the plastic bridge through to the other side.

  2. Pull the end of the loop through the device as far as possible.
    • Pull the end of the loop through the device as far as possible.

  3. Feed the end of the strap through the loop. Pull the strap tight until it is secure. Feed the end of the strap through the loop. Pull the strap tight until it is secure. Feed the end of the strap through the loop. Pull the strap tight until it is secure.
    • Feed the end of the strap through the loop. Pull the strap tight until it is secure.

결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

Andrew Entwistle

회원 가입일: 2016년 02월 17일

679 평판

안내서 4개 작성하였습니다

USF Tampa, Team 2-2, Sullivan Spring 2016 USF Tampa, Team 2-2, Sullivan Spring 2016 회원

USFT-SULLIVAN-S16S2G2

4 회원들

안내서 6개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 0

전체 시간: 150