주요 콘텐츠로 건너뛰기

OnLogic CL100 mSATA SSD Replacement

필요한 것

    • If there are rubber feet on the bottom of the device, remove the feet.

    • Remove the 4 screws on the bottom of the device.

    • After removing the orange pad, remove the screw holding the SSD in place and slide it right, then up.

    • While reassembling, align the SSD and slide it left.

결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

scx32

회원 가입일: 02/26/23

159 평판

안내서 1개 작성함

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 4

전체 시간: 54