주요 콘텐츠로 건너뛰기

Onda VI10 Speaker Replacement

필요한 것

  1. Onda VI10 Speaker Replacement, Speaker: 1 단계, 이미지 1/1
    • Use a number 0 screw driver to remove the four screws.

  2. Onda VI10 Speaker Replacement: 2 단계, 이미지 1/1
    • Power Button on the side should be pointing outward.

    • Note: This is so the ribbon cables inside are not damaged.

  3. Onda VI10 Speaker Replacement: 3 단계, 이미지 1/1
    • Locate the black and red speaker wires going back to the mother board.

    • Note: Speaker wires may run underneath the battery wires.

  4. Onda VI10 Speaker Replacement: 4 단계, 이미지 1/1
    • Carefully remove the speaker cables from the retaining tabs using a thin metal spudger.

  5. Onda VI10 Speaker Replacement: 5 단계, 이미지 1/1
    • Pry the speaker out of its molding using a thin metal spudger

  6. Onda VI10 Speaker Replacement: 6 단계, 이미지 1/1
    • Desolder the two speaker wires from the motherboard using a soldering iron.

    • Caution: Soldering Iron is extremely hot.

결론

To reassemble your device, follow these instructions in reverse order.

Carlos Diaz

회원 가입일: 03/08/17

101 평판

안내서 1개 작성함

IUPUI, Team S4-G3, Baechle Spring 2017 IUPUI, Team S4-G3, Baechle Spring 2017 회원

IUPUI-BAECHLE-S17S4G3

4 회원들

안내서 6개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 1

전체 시간: 138