One Education Infinity CMOS Battery Replacement

소개

This guide describes the process of removing and replacing the CMOS battery in the One Education Infinity.

The CMOS battery can assist with software startup and keeps the internal clock running while the device is turned off. If your computer has difficulty during startup but otherwise functions normally, or if your computer forgets what time it is when you turn it on, you may have an issue with the CMOS battery. Luckily, this part is easily accessible within the bottom case of the device, so replacement will be fairly simple once the device is open. Be sure to dispose of old batteries safely.

필요한 것

1 단계 Back Case

One Education Infinity CMOS Battery Replacement, Back Case: 1 단계, 이미지 3개 중 1개

One Education Infinity CMOS Battery Replacement, Back Case: 1 단계, 이미지 3개 중 2개

One Education Infinity CMOS Battery Replacement, Back Case: 1 단계, 이미지 3개 중 3개

Always power off your device before beginning disassembly.
Remove the screw covers and rubber feet from the bottom of the laptop with a metal spudger.

편집

2 단계

Using a Phillips #00 screwdriver, remove the sixteen 5.0 mm black screws from the back panel.

편집

3 단계

One Education Infinity CMOS Battery Replacement: 3 단계, 이미지 3개 중 3개

Using the iFixit plastic opening tool or spudger, start near the white hinge of the device and lift along the outer edges of the device until all clips are released.
Lift the back case off of the device.
Removing the back may create a loud snapping noise.

편집

4 단계 Battery

One Education Infinity CMOS Battery Replacement, Battery: 4 단계, 이미지 3개 중 1개

One Education Infinity CMOS Battery Replacement, Battery: 4 단계, 이미지 3개 중 2개

One Education Infinity CMOS Battery Replacement, Battery: 4 단계, 이미지 3개 중 3개

There may be black tape inside your device covering components or holding down wires. This tape is unimportant for the function of the device, and can be removed.
Carefully wiggle the battery cable to the right and out of the port with a plastic spudger.

편집

5 단계

One Education Infinity CMOS Battery Replacement: 5 단계, 이미지 3개 중 3개

Wedge a plastic spudger underneath the battery from the upper edge and slide it carefully along the length of the battery to separate it from the case.
There is a mild adhesive holding down the battery. Take care not to puncture or excessively bend the battery while freeing it from the adhesive.
Lift the battery out from the internal case.