필요한 것
-
-
Use a TX10 screwdriver
-
Remove the housing screws on the rear of the device.
-
6 long screws
-
3 short screws
-
-
-
-
Place the device with the white lid facing up.
-
Start to carefully lift the lid at the front of the suction nozzle. Slowly work your way up to the stem.
-
-
-
Now you can lift the flap of the vacuum cleaner bag. This was only held by the white lid.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
다른 2명이 해당 안내서를 완성하였습니다.
다음 번역가들에게 특별히 감사 드립니다:
100%
이 번역자 분들은 저희가 세상을 수리하는데 동참해 주시는 분입니다! 기여하시겠습니까?
번역 시작하기 ›