주요 콘텐츠로 건너뛰기

이 안내서에는 최근 변경 사항이 더 있습니다. 최신 비검증 버전으로 전환하십시오.

Opening the Case

필요한 것

  1. Opening the Case, Opening the Case: 1 단계, 이미지 1/1
    • Tool on left - PH000 screwdriver

    • Tool on right - iPod fix-it tool

    • Soldering Iron

  2. Opening the Case: 2 단계, 이미지 1/1
    • Locate the 3 black screws on the bottom of the camera and the 2 gray screws on each side of the camera. Remove them with a PH000 screwdriver.

  3. Opening the Case: 3 단계, 이미지 1/2 Opening the Case: 3 단계, 이미지 2/2
    • Locate the gray band that you removed the screws from; this holds the two halves of the camera together. Use an iPod fix-it tool to pry the gray band loose and remove it.

  4. Opening the Case: 4 단계, 이미지 1/1
    • Use the iPod fix-it tool to separate the back panel from the camera.

결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

Travis Buck

회원 가입일: 09/25/12

107 평판

안내서 2개 작성하였습니다

Ohio State, Team 1-2, Buehl Fall 2012 Ohio State, Team 1-2, Buehl Fall 2012 회원

OSU-BUEHL-F12S1G2

3 회원들

안내서 5개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 3

전체 시간: 786