주요 콘텐츠로 건너뛰기

소개

Pre-req for removing the faceplate from Optical Bay Enclosures #78, 79, 80

부품

지정된 부품이 없습니다.

  1. Optical Drive Enclosure Faceplate, Optical Drive Enclosure Faceplate: 1 단계, 이미지 1/1
    • Remove the three 3.0 mm Phillips screws from the optical bay enclosure.

  2. Optical Drive Enclosure Faceplate: 2 단계, 이미지 1/3 Optical Drive Enclosure Faceplate: 2 단계, 이미지 2/3 Optical Drive Enclosure Faceplate: 2 단계, 이미지 3/3
    • Starting from the left edge, gently pull open the optical bay enclosure.

    • Continue to pull open the two halves of the enclosure until they separate.

  3. Optical Drive Enclosure Faceplate: 3 단계, 이미지 1/1
    • Remove the two 3.0 mm Phillips screws securing the faceplate to the optical bay enclosure.

  4. Optical Drive Enclosure Faceplate: 4 단계, 이미지 1/3 Optical Drive Enclosure Faceplate: 4 단계, 이미지 2/3 Optical Drive Enclosure Faceplate: 4 단계, 이미지 3/3
    • Lift the black plastic faceplate out of the optical bay enclosure.

    • You will no longer need the faceplate or the two Phillips screws that held it in place. Set those parts aside if you ever wish to put the faceplate back into the enclosure.

    • Reassemble the optical bay enclosure without the faceplate, reusing the original three 3.0 mm Phillips screws to keep it intact.

결론

To reassemble your device, follow these instructions in reverse order.

Brittany McCrigler

회원 가입일: 2012년 03월 05일

87,492 평판

안내서 132개 작성하였습니다

0 Comments

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 18

전체 시간: 713