소개

This guide would be useful in the event of a broken, scratched, or cracked lens.

  1. Pull the slider labeled open, on the bottom right, to unlock the battery.
    • Pull the slider labeled open, on the bottom right, to unlock the battery.

  2. Pull battery out of slot.
    • Pull battery out of slot.

    • Remove the three screws (length 7.7 mm) from the bottom of the outer case using a JIS000 screwdriver.

    • Remove plastic casing hiding screws from the strap side of the casing.

    • Unscrew the three screws (length 4.75 mm) using a PH000 screwdriver.

    • Unscrew the two screws (length 6.4 mm) using a JIS000 screwdriver.

    • Unscrew the four screws (2.9 mm length) from the screen side of the casing using a JIS000 screwdriver.

    • Remove both side casings by gripping the sides with your hands and pulling gently.

    • Although it requires extra steps, it is advised that you remove the motherboard and screen to ensure that nothing is damaged in the process of replacing the lens.

    • Unscrew the seven screws (length 4.22 mm) from the motherboard using a PH000 screwdriver.

    • Pull out or desolder all connected cords from motherboard.

    • Remove top of the casing to reveal the screws on lens.

    • Unscrew the four screws (size 4.90 mm) using a PH00 screwdriver.

    • Pull out lens.

    • Remove cord from lens.

결론

To reassemble your device, follow these instructions in reverse order.

Nathan Mcintyre

회원 가입일: 2018년 11월 05일

303 평판

안내서 2개 작성하였습니다

IUPUI, Team S1-G3, Baechle Fall 2018 IUPUI, Team S1-G3, Baechle Fall 2018 회원

IUPUI-BAECHLE-F18S1G3

3 회원들

안내서 3개 작성하였습니다

조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 22

전체 시간: 60