주요 콘텐츠로 건너뛰기

Oregon Scientific Meep! 4.0 Screen Replacement

필요한 것

  1. Oregon Scientific Meep! 4.0 Screen Replacement, Oregon Scientific Meep! 4.0 Disassembly: 1 단계, 이미지 1/1
    • Use a screwdriver to remove the four 7.0 mm Philips #00 screws from the back of the device.

  2. Oregon Scientific Meep! 4.0 Screen Replacement: 2 단계, 이미지 1/1
    • Use a plastic opening tool to detach the clips on the inside of the device.

  3. Oregon Scientific Meep! 4.0 Screen Replacement, Screen: 3 단계, 이미지 1/1
    • Remove the black tape holding the battery in place.

  4. Oregon Scientific Meep! 4.0 Screen Replacement: 4 단계, 이미지 1/1
    • Use a spudger to separate the battery from its adhesive.

  5. Oregon Scientific Meep! 4.0 Screen Replacement: 5 단계, 이미지 1/1
    • Use a screwdriver to unscrew the three 4.0 mm Philips #00 screws holding the motherboard in place.

  6. Oregon Scientific Meep! 4.0 Screen Replacement: 6 단계, 이미지 1/1
    • Use a plastic opening tool and place the tip in between the white and black pieces holding in the ribbon cable in to release the three ribbon cables around the motherboard.

  7. Oregon Scientific Meep! 4.0 Screen Replacement: 7 단계, 이미지 1/1
    • Remove the motherboard and unscrew the twelve 7.0 Phillips #00 screws holding the metal casing around the screen in.

  8. Oregon Scientific Meep! 4.0 Screen Replacement: 8 단계, 이미지 1/1
    • Use a plastic opening tool to undo the metal clips holding the screen in place.

  9. Oregon Scientific Meep! 4.0 Screen Replacement: 9 단계, 이미지 1/1
    • Remove the plastic over the screen and use a spudger or plastic opening tool to remove the screen from the sticky adhesive.

결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

Lauren Milici

회원 가입일: 09/21/15

216 평판

안내서 2개 작성하였습니다

University of Tampa, Team 1-3, Whiteside Fall 2015 University of Tampa, Team 1-3, Whiteside Fall 2015 회원

UT-WHITESIDE-F15S1G3

3 회원들

안내서 12개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 4

30일 전: 5

전체 시간: 352