기기를 수리하세요 커뮤니티 상점

Oregon Scientific Meep! 4.0 Speakers Replacement

소개

By following the steps below, you will be able to remove and replace the speakers of your Oregon Scientific Meep! 4.0.

필요한 것

  1. Oregon Scientific Meep! 4.0 Speakers Replacement, Oregon Scientific Meep! 4.0 Disassembly: 1 단계, 이미지 1/1

    • Use a screwdriver to remove the four 7.0 mm Philips #00 screws from the back of the device.

    번역하기

  2. Oregon Scientific Meep! 4.0 Speakers Replacement: 2 단계, 이미지 1/1

    • Use a plastic opening tool to detach the clips on the inside of the device.

    번역하기

  4. Oregon Scientific Meep! 4.0 Speakers Replacement, Speakers: 3 단계, 이미지 1/2 Oregon Scientific Meep! 4.0 Speakers Replacement, Speakers: 3 단계, 이미지 2/2

    • Remove the electric tape holding the wires of the speakers in place and gently pull the speakers out of their slots in the device.

    번역하기

  5. Oregon Scientific Meep! 4.0 Speakers Replacement: 4 단계, 이미지 1/2 Oregon Scientific Meep! 4.0 Speakers Replacement: 4 단계, 이미지 2/2

    • Use a soldering station to separate the wires from the speakers.

    번역하기
결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 2명과 함께

Jess Forte

회원 가입일: 09/25/15

434 평판

안내서 4개 작성하였습니다

배지: 11

배지 +8개 더

팀

University of Tampa, Team 1-3, Whiteside Fall 2015 University of Tampa, Team 1-3, Whiteside Fall 2015 회원

UT-WHITESIDE-F15S1G3

3 회원들

안내서 12개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 3

30일 전: 3

전체 시간: 144