기기를 수리하세요 커뮤니티 상점

Oster Blend-N-Go My Blend Drinking Lid Seal Replacement

소개

Use this guide to replace your old or damaged Drinking Lid Seal.

필요한 것

  1. Oster Blend-N-Go My Blend Drinking Lid Seal Replacement, Blender Bottle: 1 단계, 이미지 1/2 Oster Blend-N-Go My Blend Drinking Lid Seal Replacement, Blender Bottle: 1 단계, 이미지 2/2

    • Grip the blender base with one hand and blender bottle with the other hand.

    • Rotate the blender bottle a quarter turn counterclockwise .

    • Lift the blender bottle out of the blender base. The blade assembly should still be attached to the blender bottle.

    편집

  2. Oster Blend-N-Go My Blend Drinking Lid Seal Replacement: 2 단계, 이미지 1/3 Oster Blend-N-Go My Blend Drinking Lid Seal Replacement: 2 단계, 이미지 2/3 Oster Blend-N-Go My Blend Drinking Lid Seal Replacement: 2 단계, 이미지 3/3

    • Grip the blade assembly with one hand and blender bottle with the other hand.

    • Rotate the blade assembly counterclockwise until it is completely unscrewed from the blender bottle.

    • Lift the blender bottle to separate it from the blade assembly.

    편집

  3. Oster Blend-N-Go My Blend Drinking Lid Seal Replacement, Drinking Lid Assembly: 3 단계, 이미지 1/1

    • After removing the blade assembly from the blender bottle, ensure that your drinking lid assembly has its seal placed in the seal bed.

    편집

  5. Oster Blend-N-Go My Blend Drinking Lid Seal Replacement: 4 단계, 이미지 1/3 Oster Blend-N-Go My Blend Drinking Lid Seal Replacement: 4 단계, 이미지 2/3 Oster Blend-N-Go My Blend Drinking Lid Seal Replacement: 4 단계, 이미지 3/3

    • Grab the blender bottle with one hand and the drinking lid assembly with the other.

    • Place the drinking lid assembly onto the blender bottle and twist it clockwise until it is tight around the blender bottle.

    편집

  6. Oster Blend-N-Go My Blend Drinking Lid Seal Replacement, Drinking Lid Seal: 5 단계, 이미지 1/1

    • After separating the drinking lid assembly from the blender bottle, position the plastic opening tool on either side of the seal in the drinking lid assembly.

    • Wedge the tool between seal and seal seat wall.

    편집

  7. Oster Blend-N-Go My Blend Drinking Lid Seal Replacement: 6 단계, 이미지 1/2 Oster Blend-N-Go My Blend Drinking Lid Seal Replacement: 6 단계, 이미지 2/2

    • Gently pry the seal up while lifting seal out of the seal seat.

    편집

  8. Oster Blend-N-Go My Blend Drinking Lid Seal Replacement: 7 단계, 이미지 1/2 Oster Blend-N-Go My Blend Drinking Lid Seal Replacement: 7 단계, 이미지 2/2

    • Press new seal into seal seat with finger.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 3명과 함께

Paul Long

회원 가입일: 08/27/15

710 평판

안내서 4개 작성하였습니다

배지: 12

배지 +9개 더

팀

USF Tampa, Team 12-6, Blackwell Fall 2015 USF Tampa, Team 12-6, Blackwell Fall 2015 회원

USFT-BLACKWELL-F15S12G6

3 회원들

안내서 5개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 1

7일 전: 4

30일 전: 8

전체 시간: 835