물건을 수리하세요 커뮤니티 상점

PDP Rematch Advanced Back Buttons Replacement

소개

The back buttons on your PDP Rematch Advanced should be replaced if they are getting stuck and not being pressed down completely. If you need to replace the back button, take out the motherboard with this guide. The back buttons are attached to the back shell. The back buttons can be removed by taking out the components located behind the motherboard.

필요한 것

  1. PDP Rematch Advanced Back Buttons Replacement, Joystick Cover: 1 단계, 이미지 3개 중 1개 PDP Rematch Advanced Back Buttons Replacement, Joystick Cover: 1 단계, 이미지 3개 중 2개 PDP Rematch Advanced Back Buttons Replacement, Joystick Cover: 1 단계, 이미지 3개 중 3개

    • Orient the controller so the back side is facing you.

    • Use a Phillips #000 screwdriver to remove the seven 9 mm screws that secure the back shell.

    편집

  2. PDP Rematch Advanced Back Buttons Replacement: 2 단계, 이미지 3개 중 1개 PDP Rematch Advanced Back Buttons Replacement: 2 단계, 이미지 3개 중 2개 PDP Rematch Advanced Back Buttons Replacement: 2 단계, 이미지 3개 중 3개

    • Pull apart the controller's front and back shells with moderate force.

    • Orient the controller so that the front shell is facing the floor to prevent the face buttons from falling out.

    편집

  3. PDP Rematch Advanced Back Buttons Replacement: 3 단계, 이미지 2개 중 1개 PDP Rematch Advanced Back Buttons Replacement: 3 단계, 이미지 2개 중 2개

    • Twist the thumbstick to remove it from the motherboard. Repeat this step if both thumbsticks need to be replaced.

    편집

  5. PDP Rematch Advanced Back Buttons Replacement, Back Shell: 4 단계, 이미지 2개 중 1개 PDP Rematch Advanced Back Buttons Replacement, Back Shell: 4 단계, 이미지 2개 중 2개

    • Grab the motor and pull away from the back shell. Repeat for both motors.

    편집

  6. PDP Rematch Advanced Back Buttons Replacement: 5 단계, 이미지 2개 중 1개 PDP Rematch Advanced Back Buttons Replacement: 5 단계, 이미지 2개 중 2개

    • Use a Phillips #00 Screwdriver to remove the two 5mm screws from the motherboard.

    편집

  7. PDP Rematch Advanced Back Buttons Replacement: 6 단계, 이미지 3개 중 1개 PDP Rematch Advanced Back Buttons Replacement: 6 단계, 이미지 3개 중 2개 PDP Rematch Advanced Back Buttons Replacement: 6 단계, 이미지 3개 중 3개

    • Remove the motherboard from the back shell using moderate force.

    편집

  8. PDP Rematch Advanced Back Buttons Replacement, Back Buttons: 7 단계, 이미지 2개 중 1개 PDP Rematch Advanced Back Buttons Replacement, Back Buttons: 7 단계, 이미지 2개 중 2개

    • Use a Phillips #00 to remove the two 5mm screws from the back buttons.

    편집

  9. PDP Rematch Advanced Back Buttons Replacement: 8 단계, 이미지 3개 중 1개 PDP Rematch Advanced Back Buttons Replacement: 8 단계, 이미지 3개 중 2개 PDP Rematch Advanced Back Buttons Replacement: 8 단계, 이미지 3개 중 3개

    • Lift the back button, and then pull it out through the back shell. Do this for both back buttons.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

작성자

2다른 기여자 명과 함께

Collin Lawe

회원 가입일: 10/02/23

447 평판

안내서 3개를 작성함

배지: 9

배지 +6개 더

팀

Utah Tech University, Team 1-1, McMurrin Spring 2024 Utah Tech University, Team 1-1, McMurrin Spring 2024 회원

UTAHTECH-MCMURRIN-S24S1G1

2 회원들

안내서 7개를 작성함

0가이드 댓글

댓글 쓰기

조회 통계:

지난 24시간: 2

지난 7일: 12

지난 30일: 22

전체 시간: 448